14K yellow gold seven-stone ring with small round stones in bezel settings spaced evenly across a thin band

Diamond Color and Clarity Chart: What F-SI Means

Last updated: November 2026

F-SI is a diamond grade made of two parts: F for color and SI for clarity. F is one of the three colorless grades at the top of the D-to-Z color scale, and SI means slightly included, so a skilled grader can see small inclusions under 10x magnification. The natural diamonds in our rings are graded F color and SI clarity, and this page shows where that grade sits on both charts.

At a glance

  • The color scale used across the trade was created by the Gemological Institute of America (GIA). It runs from D to Z, and D, E and F are colorless.
  • The GIA clarity scale has 11 grades, from Flawless (FL) to Included (I3), and every grade is judged under 10x magnification.
  • SI1 and SI2 mean the inclusions are noticeable to a skilled grader at 10x.
  • Our diamond rings use natural diamonds graded F color and SI clarity, mostly 1 to 2 mm across.

What does the diamond color scale mean?

The diamond color scale measures how much yellow or brown tint a white diamond has, starting at D for no color and ending at Z for a light but clear tint. Graders compare each stone with master stones under controlled light, and the letters are grouped into five ranges.

Grades Range What it means
D, E, F Colorless No tint a grader can see face up; the top of the scale
G, H, I, J Near colorless Slight tint, usually seen only by trained graders
K, L, M Faint A faint warm tint
N to R Very light A light yellow or brown tint
S to Z Light A clear yellow or brown tint

An F diamond is the third letter on the scale, inside the colorless group. Set in yellow, rose or white gold, it reads as a white stone.

What does the diamond clarity scale mean?

The diamond clarity scale grades the tiny crystals, feathers and clouds inside a diamond (inclusions) and the marks on its surface (blemishes), always as seen under 10x magnification. GIA defines 11 grades in six groups, and you can read the full definitions on GIA's diamond clarity page.

Grade Name Under 10x magnification
FL Flawless No inclusions or blemishes
IF Internally Flawless No inclusions, only blemishes
VVS1, VVS2 Very, Very Slightly Included Minute inclusions, extremely to very difficult to see
VS1, VS2 Very Slightly Included Minor inclusions, difficult to somewhat easy to see
SI1, SI2 Slightly Included Noticeable inclusions, easy to very easy to see
I1, I2, I3 Included Obvious inclusions that may affect transparency and brilliance

What does F-SI mean on a small diamond?

On a small diamond, F-SI means a colorless stone that has some inclusions a grader can find with a loupe. The clarity grade describes what is seen at 10x, not what you see at arm's length, and on a stone of 1 to 2 mm the inclusions are small in absolute size as well.

Color works differently. A small stone shows less body color than a large one, but a colorless grade like F helps a row of tiny diamonds look evenly white next to each other, which matters on a band set with nine or seventeen stones.

In short, F-SI sits at the top of the color scale and in the middle of the clarity scale.

How do you read the grade on our product pages?

On each diamond ring page, the feature list shows three lines about the stones: "Diamond Color and Clarity: F - SI", "All Diamonds are 100% Natural" and the carat total weight, such as "0.11 ctw." The ring's details are also written on a card that ships with it.

The carat number is the weight of all the diamonds added together. Our guide on what CTW means on a diamond ring shows how stone count and size add up to that figure. If you are still deciding between stones, cubic zirconia vs diamond compares the two in the same designs. Cubic zirconia has no color or clarity grade, because those scales are for diamonds.

Which of our rings use F-SI diamonds?

All of our diamond rings use natural diamonds graded F color and SI clarity. These three show the grade in different ways.

Seven-stone bezel diamond ring (2S20DIA)

Seven round diamonds of 2.20 mm, each in its own gold bezel, spaced evenly across a 1.30 mm band, 0.35 ct in total. These are among the largest round diamonds we use, so it is a good ring for seeing how an F stone looks white against gold.

Best for: an anniversary ring with a clear row of diamonds.

Half eternity band (2S10)

Seventeen 1.60 mm diamonds in a single row across the top, 0.34 ct in total. With this many stones side by side, an even color grade helps the line look uniform.

Best for: a wedding band with a continuous line of diamonds.

Intertwined flower ring (LR99)

Two wavy bands wrap around each other with two small gold flowers and a line of nine 1.40 mm diamonds, 0.11 ct in total. The diamonds follow the curve, so they catch light at slightly different angles.

Best for: a softer, floral look for everyday wear.

Browse more by karat

See all diamond designs in 10K, 14K or 18K gold, and designs that pair diamonds with colored stones in 14K gold diamond gemstone rings. Baguette shapes are graded on the same scales; our baguette diamond guide explains how the cut changes the look.

Diamond grade questions

Is SI clarity good for a ring?

SI clarity is a common grade in fine jewelry, and GIA notes that most diamonds fall in the VS or SI groups. For small side stones, it gives natural diamonds at a practical grade, and the inclusions it describes are judged under 10x magnification.

What is the difference between SI1 and SI2?

SI1 is the higher of the two. Both have inclusions a grader notices at 10x, and in SI2 they are easier to see. Our product pages list the grade as SI.

Is F color better than G color?

F is one grade higher than G. F is in the colorless range and G starts the near-colorless range, and the difference between neighboring grades is very small.

Do lab-grown diamonds use the same scale?

Yes, lab-grown diamonds are graded on the same color and clarity scales. Our diamond rings use natural diamonds.

Find your grade on a ring

Open the 2S20DIA seven-stone ring and scroll to its feature list: you will see the color, clarity and carat lines described above, and our other diamond pages use the same format.

About the author

Emre is the founder of Aymir Jewelry. Aymir rings are made to order in 10K, 14K or 18K solid gold in our Istanbul workshop.

Back to blog